Basic Safety and Training Solutions
  • Home
  • Who We Are
    • About Us
    • Gallery
  • Student Dashboard
    • Account details
    • Student Forum
  • Login
  • Buy HSE Toolkits
  • Sign Up Now
  • Contact Us
  • Verify
  • Face To Face Training
    • Basic Fire Fighting Level 1
    • Basic Fire Fighting Level 2
    • Basic Fire Prevention Awareness
    • Conduct an Ergonomic Assessment
    • Introduction to Risk Assessment
    • Occupational Certificate – Safety Inspector
    • Risk Assessment
    • Safety Officer
    • SHE Representative
    • Supervisor Safety
Select Page

PREPARE, PRIME, AND PAINT PREVIOUSLY COATED SURFACES

Current Status
Not Enrolled
Price
Free
Get Started
Log In to Enroll

NATIONAL URETHANE INDUSTRIES (NUI) POLYBRON BASED CONCRETE CORROSIVE PROTECTION COATING SYSTEM 

 

 

MSDS 350-012H

MSDS 500 211

MSDS 500-208F

MSDS 520 003

MSDS 800 MT A

MSDS 800 MT B

MSDS 850A11

MSDS 850G99

MSDS 900 003

PREPARE, PRIME, AND PAINT PREVIOUSLY COATED SURFACES - Knowledge Assessment.

Course Navigation

Course Home Expand All
INTRODUCTION.
COURSE OUTCOMES.
MODULE 1 – IDENTIFY AND USE TOOLS, MATERIAL AND PROTECTIVE EQUIPMENT FOR PAINTING
12 Lessons
Resources.
Temporary Suspended Platforms.
Angle Grinders.
220V Extension power cables.
Two way radios.
Paint brushes/rollers.
Electric paddle mixer.
Humidity and Temperature meter.
Hand tools (Trowel, Spatula/Putty knife/Scraper, Hammer, etc.)
Wind speed meter.
Wet Film Thickness Comb Gauges.
Ultrasonic DFT Meter
LESSON 2 – WEATHER CONDITIONS.
LESSON 3 – MIXING.
LESSON 4 – PAINT PRE-QUALIFICATION PULLOFF ADHESION TESTS (PQT)
LESSON 5 – PREPARE AND PRIME NEW SURFACES.
2 Lessons
5.1 – Cleanliness of surface prior to application
5.2 – Substrate preparation and verification prior to painting
LESSON 6 – APPLICATION OF PRIMERS, CREAMS AND PAINT AS PER NUI SPECIFICATION 585.
4 Lessons
6.1 – Application of Ultraprime 800 M/T Concrete primer
6.2 – Application of Polybron 350-012HBC Cream / Ultrathane 500-208F Polyurethane
6.3 – Application of Ultracote 850G99 White or 850A11 Red / Ultrathane 500-211 top coat
6.4 – Overlapping of Paint between aviation bands during application
LESSON 9 – OVER COATING USING NUI BAKKIE BOND.
LESSON 10 – DETERMINATION OF WET AND DRY FILM THICKNESS.
2 Lessons
10.1 – Wet Film Thickness (WFT)
10.2 – Dry Film Thickness (DFT)
LESSON 11 – QUALITY CONTROL.
LESSON 12 – SAFETY.
2 Lessons
12.1 – Risk Assessment
12.2 – Working with Hazardous Chemical Agents.
LESSON 13 – ENVIRONMENTAL.
CLOSING.
© 2025 Basic Safety and Training Solutions. Website developed by New Oaks Developments
Login
Accessing this course requires a login. Please enter your credentials below!

Lost Your Password?